Skip to content

11/13/24, 7\:31 PM Guide | Ankle X-ray interpretation

Ankle X-ray interpretation

Table of contents

Introduction

The ankle is a hinge joint formed by three bones\: the tibia, the
Proximally, the joint comprises the medial malleolus (the distal end of the tibia), the tibial plafond and the lateral malleolus
(the distal end of the
distally.
This comes from the similarity to the mortise and tenon joint used in carpentry to create stable connections (Figure 1).
Figure 1. A mortise and tenon joint in carpentry [1]
Further reinforcement of the ankle joint is provided by a strong
syndesmosis, and the medial (or deltoid) and lateral ligaments which arise from the medial and lateral malleolus respectively.
The ankle joint allows dorsi
Geeky Medics guides to the bones of the lower limb and the bones of the foot.
https\://app.geekymedics.com/osce-guides/data-interpretation/ankle-X-ray-interpretation/ 1/611/13/24, 7\:31 PM Guide | Ankle X-ray interpretation
Figure 2. Mortise radiograph of the left ankle showing the bones and ligaments (added in yellow) of the ankle joint. [2]

Principles of ankle X-ray interpretation

Demographics

Begin by checking that you are looking at the correct radiograph of the correct patient.
It is important to con
Patient details (name, date of birth, unique identi
Date and time the radiograph was taken
Correct side (right vs. left)

Views

In the United Kingdom, two views of the ankle joint are routinely performed\:
Mortise view\: this is a modi
lateral malleoli are in the same horizontal plane and joint visualisation is optimised
Lateral view
In some cases, a weight-bearing or a stress radiograph (gravity stress or manual stress) may also be required.
Consider additional views such as a full-length tibia/
a foot radiograph) to rule out additional fractures.

Comparison

Comparison to previous radiographs, if available, can be especially useful when interpreting radiographs.
Asymptomatic contralateral sides are not routinely radiographed, however,Β§ if a recent or old image of the contralateral side is
available, these may also be compared as the skeletal system is generally symmetrical and could therefore act as a reference
point.

Interpreting an ankle X-ray

Use a methodical approach such as ABCs to look at a radiograph.
https\://app.geekymedics.com/osce-guides/data-interpretation/ankle-X-ray-interpretation/ 2/611/13/24, 7\:31 PM Guide | Ankle X-ray interpretation

Adequacy

Ideally, you should be able to see at least the distal third of the tibia and
addition to those, you should be able to see the calcaneum and the base of the 5 th
metatarsal on the lateral view.
Penetration is adequate if you can clearly distinguish between bones and soft tissues.
Look out for artefacts.

Bones

In both views, trace the cortical outline of all the bones visible on the radiograph. On the mortise view, trace the mortise and
the talar dome surface. On the lateral view, assess the medial, lateral and posterior malleoli, the calcaneum and the base of the

A loss in bone or joint alignment may be a result of a fracture, joint subluxation (partial dislocation) or dislocation. Note any
other abnormalities such as osteophytes or calluses.
Look at the internal architecture of the bone (e.g. a thinner cortex and an increased bone lucency indicate osteopenia or
osteoporosis). A fracture in an abnormal bone is termed a pathological fracture.
Beware of normal developmental variants such as accessory ossicles which may be mistaken for fractures.
Figure 3. Lateral view of the ankle tracing the outline of the tibia (green),
(orange). Note the os trigonum (red circle) which is an accessory ossicle of the foot and a normal variant. [3]

Cartilages (joint involvement)

Assess the joint space on the mortise view. A loss of joint space may be due to a loss of cartilage and is commonly seen in
conditions such as osteoarthritis. Joint widening may be due to fracture or dislocation.
Look at the medial clear space. This is the widest distance between the medial border of the talar bone and the lateral border
of the medial malleolus. It should be approximately equal to the superior clear space (the distance between the articular
surfaces of the tibia and the talus).
https\://app.geekymedics.com/osce-guides/data-interpretation/ankle-X-ray-interpretation/ 3/611/13/24, 7\:31 PM Guide | Ankle X-ray interpretation
Figure 4. Mortise view of a normal left ankle joint. Note how the medial clear space (green line) is comparable to the superior clear space (pink line). Note
the tibio
Widening of the medial clear space (i.e. lateral talar shift) suggests syndesmosis disruption and therefore joint instability.
A loss of tibio
Joint widening with no obvious fracture on the ankle radiograph may also indicate a more proximal fracture such as a
Maisonneuve fracture (this is a combination of an unstable ankle due to a ligamentous and/or bony injury together with a
proximal
Figure 5a. Mortise view of an incongruent left ankle joint. There is a widening of the medial clear space (green circle) and lateral talar shift. The superior
clear space (pink oval) is asymmetrical along its own length and the medial and superior clear spaces are no longer comparable. The tibio
is reduced (yellow circle). No obvious fracture is visible. [2]
https\://app.geekymedics.com/osce-guides/data-interpretation/ankle-X-ray-interpretation/ 4/611/13/24, 7\:31 PM Guide | Ankle X-ray interpretation

Soft tissues

Carefully inspect the soft tissues, as this can provide helpful information. For example, soft tissue swelling or a joint e
may sometimes indicate the presence of a subtle fracture.

Describing a fracture on an ankle radiograph

When describing an ankle X-ray, use the following structure\:
Details of the radiograph and the patient
Site of fracture\: which bone, which part of the bone, left or right
Type of fracture (e.g. transverse, oblique, spiral)
Simple or comminuted
Displacement and angulation of the distal fracture fragment in relation to the proximal fracture fragment
Intra-articular or extra-articular (i.e. Does the fracture line extend into a joint?)

Classi

Anatomical descriptors of ankle fractures include (but are not limited to)\:
Isolated medial malleolus fracture
Isolated lateral malleolus fracture
Bimalleolar fracture (medial + lateral malleoli fractures)
Trimalleolar fracture (medial + lateral + posterior malleoli fractures)
Lateral malleolus fractures can be further classi
Weber classi
Type A\: below the syndesmosis
Type B\: at the level of the syndesmosis
Type C\: above the syndesmosis
Figures 6. Mortise and lateral views of the right ankle. On the mortise view, there is a minimally displaced transverse fracture extending through the distal
aspect of the
https\://app.geekymedics.com/osce-guides/data-interpretation/ankle-X-ray-interpretation/ 5/611/13/24, 7\:31 PM Guide | Ankle X-ray interpretation

Tips for ankle X-ray interpretation

Familiarise yourself with normal radiographs of the ankle, so that you are able to recognise when things don't look quite
right.
If you spot an abnormality on a radiograph, continue to examine the entire area visible before stopping in order not to miss
any further abnormalities.
Fractures can sometimes be very subtle; carefully examine the patient and correlate imaging with clinical
If i d bt l k f i i t
Source\: geekymedics.com
https\://app.geekymedics.com/osce-guides/data-interpretation/ankle-X-ray-interpretation/ 6/6